Tag Archives: Crystals

Making Soap From Wood-Ash Lye

The key to staying clean is using soap. Soap helps break the chemical bonds of dirt and stains to fabric and other items. It also helps to kills germs, including dangerous bacteria, which serves to keep us healthier. However, when you’re living amongst the trees, miles from any town or store, soap is difficult to come by. And even if you live down the street from a store and have access to soap, you may wish to make your own, for the experience and to save a little money.

A story I read says that the ancients noticed that when washing their clothes in the river, the clothes usually got cleaner after a rain. So, initially it was thought that rain water helped clean the clothes. However, later it was realized that this cleaner process only occurred in the river downhill from the area where animals were sacrificed as burned offerings. Now, whether this story is factual or not, it describes the three very basic ingredients of soap: 1) Water (rain water is preferred); 2) Fat (any animal or plant fat); and 3) Lye (homemade or commercial).



There is a difference between homemade, or original lye, and commercial lye.Homemade lye is Potassium Hydroxide and can be made rather simply at home from wood ashes Potassium Hydroxide makes a softer soap, so the fat or oils used will need to be beef tallow (beef fat) or even lard (pig fat). You can use other fats, but the finished product will be much softer.

Commercial lye is Sodium Hydroxide, which is much more complex to manufacture, and is often used in drain openers. In order for commercial lye to work properly in soap, it must be pure sodium hydroxide, which is becoming difficult to find in grocery stores. If you are not sure if your lye is pure, you can look at the crystals. If you see flecks of gray or black, you should avoid it when making soap. You can also ask the manufacturer.



Both types of lye are very caustic and can cause serious burns and injuries when they come in contact with skin and eyes. In my experience, commercial lye is extremely caustic and unforgiving. Take it seriously and wear eye protection, protective gloves, and keep all skin surfaces covered when working with any type of lye.


Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Why Pump Tubing Was So Important To Our Laboratory Operation

Pump tubing is such a such a small area to look at when you look at bigger things in the biochem research laboratory, but once a tubing line is damaged or wears out, time runs out. Everything has to cease in order to replace it, and that means a stop to productivity. There are so many laboratory products as far as tubing is concerned to fit the pumping products that are in place, but finding the reliable and durable tubing that everyone wants is just a click away. Scientific pump products have to keep working, so buying an excellent brand of tubing may be necessary.

There was an instance where our old electrolyte system set separately from our primary chemistry analyzer was having real issues with the pump tubing, as it was wearing out faster than it should have. The peristaltic laboratory pump was working OK, but after taking the rotator wheel apart, we noticed that two of the rollers were clogged with electrolyte buffer crystals! This solved our dilemma, since now the rollers were rolling instead of rubbing. It is bizarre how the results did not seem to be affected by all of this. But to make sure we ran all of our controls again, to make sure everything was running OK.

Remember, there is very good quality peristaltic pump tubing (and many other types) out there in the marketplace, but making the right choice that would be a money saver in the end depends on the reputation of the supplier and the physical properties of the tubing itself.

It took a while, since we use the tubing products at a very quick rate, but we finally decided on the platinum-cured silicon tube products for our main jobs, as it can withstand the work load of our laboratory.


Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Micro Dermabrasion Procedure for Acne

If you want to have clear skin, you should consider obtaining micro dermabrasion. People who go through this process would like to get rid ofsun damage, lessen acne scars and diminishthe lookof wrinkles and other skin issues.

Basically, it will be able to give you smoother skin especiallyif you proceed through numeroussessions. A lot ofolder women go forthis proceduresince boring and flakyskin becomes renewed and smooth.

Most women who have bad skingrow up think that they will go throughthe rest of their life having acne scars. You can eliminate acne with micro dermabrasion for acne scars. This process can be done at a spa or a skin doctorclinic. Crystals are used onto the skin’s surface which scrapes off the outmostlayer of the skin. The procedure is painless and you don’t need a long recoveryperiod. This process is perfect for people who have blackheads or white heads. Micro dermabrasion for acneis a blendof slightskin abrasionand suction.

You have to be cautiouswhen you useskin products at home that concentrateon micro dermabrasion becausethere are someproducts that are not rightto your skin type. That’s why we recommend to do a simple skin test on your inner arm before you use these creams on the facial area.

Typically, the more regularlyyou use these products, the more visible is the effect on your skin.

Although, you have to be carefulthough if your acne issues are acutesince it will do you more harmthan good. So consult a reliabledermatologist before you undergo any process.


Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace