Some things you must think about and perform when adding over sub-floors comprise the following. ensure the sheetrock and tile are totally dry before laying the flooring. At that point, only the final woodwork and trim will have to be completed. The inside of the building should be dry and the temperature should be cushty enough in which to work before, during and after the installation process.
 
 Strip the paint, wax oil, plaster, sheetrock mud, and any other materials and surface failings. You may need to grind a concrete floor with serious grit coat paper in order to loosen any loose concrete, dirt or other particles or contaminates ; then totally vacuum or sweep. Before adding new hardwood flooring, any glues or adhesives must be detached.
 
 Subfloors and their accompanying systems ought to be structurally strong, and they have to be installed using the maker’s wants and suggestions. Warranties will not cover Problems that are the result of inadequate or wrong substructures or inaccurate installation of those substructures.
 
 It is highly important the work areas are thoroughly dry. The interior walls ought to have a virtual humidity of 35-48% as needed by adhesive makers and also be dry enough for painting before installation and maintained after installation is finished.
 
 With a concrete subfloor, it is important that you initially inspect for dryness, then employ a average rubber mat or taped plastic test ; then take off after 24 hours and check for any trace of moisture. Don’t lay the flooring if there’s any moisture. A credible moisture detection process may be employed on all concrete subfloors. Administer a calcium chloride test to pinpoint the moisture content of the subfloor. The moisture content shouldn’t be more than ten percent, or three pounds per 1,000 square feet of space. Don’t install the flooring if it exceeds these boundaries. You can also do this with antique wood floors
 
 The skin of the concrete subfloors must not be slick, and it’s got to be clean, level, durable and have satisfactory compression strength of at least 3,000 pounds per square inch. Take off sections that aren’t flat,eg those that can have waves or trowel marks. Eliminate any marks or debris by grinding or using a leveling compound composed from latex. The subfloor flatness must be checked especially along the walls, and improved, when necessary. The products can be installed over dry, flat wood subfloors, like plywood, in addition to the concrete subfloors. The thickness of the overlay material should have a total of 3 / 4″ of subfloor thickness if plywood is utilized as an overlay.
 
 The more recent wood types of subfloors must also be checked for dampness by utilizing a moisture meter. Subfloors which are composed of wood or plywood should not exceed a 12% moisture content or a 4% disparity in moisture content between the flooring and subfloor. Buy reclaimed antique wood floors here.